Your location:Products >> Drain valve >> Lever float steam trap
Lever float steam trap
Model: FT44
Nominal diameter: DN15 ~ 50mm
Nominal: PN0.01 ~ 1.6MPa
Operating temperature: ≤350 ℃
Main material: Forged steel, stainless steel, titanium steel, chromium molybdenum steel, low temperature steel
Operation: manual
design specifications : GB / T 9093
Construction length: GB / T 12250
Threaded connection: ISO 228
Flange connection: JB / T 79, GB 9113, ANSI B16.34
Testing and Testing: GB / T 13927
Product details

Lever Float Traps, FT44H Lever Float Steam Traps are widely used in industrial steam heating equipment, all kinds of large heat exchangers and dryers, jacketed pots and so on, especially for condensing water in large displacement at the workplace . 
 
   Lever float trap structural features and working principle:

 1, rolling valve machinery (the new SCCV switch), with excellent sealing and durability. 
 2, the balance of dual seat design, smaller than the average size of the trap and large displacement, large displacement field and more play to the superiority. 
 3, built-in bimetal air automatic discharge valve to prevent air blockage and steam steam lock. 
 4, using a unique U-shaped bimetal vent, can greatly shorten the starting time of equipment. 
 5, all parts installed in the valve cover, the valve without removing from the pipe, you can repair and maintenance, simple and convenient.
 

Product number Nominal diameter DN (mm) Connection method Working pressure (MPa) Temperature (℃) Overall dimensions (mm)
L L1 H1 H2 W
SFT14-16 15 ~ 20 Thread 0.01 ~ 1.6 250 125 155 55 55 155
SF14-16 15 ~ 25 Thread 0.01 ~ 1.6 250 190 220 120 80 140
F44-16 
       (SFT43)  
       (SFT46)
15 ~ 20 
       25
Flange 0.01 ~ 1.6 350 195
       215
255 85 115 110
32 ~ 50 
       65 ~ 80
Flange 0.01 ~ 1.6 350 230
       270
345
       420
175
       218
110
       125
190 
       220
SUNA23 26H 15 ~ 20 
       25 
       32 ~ 50
Flange 0.01 ~ 4.0 350 195
       215
       230
145
       235
60 
       125
90 
       145